Err

01204 396301
Catalog
Search   Back to Catalog

FrancisFrancis TRIO X1, X3, X6 - Head Kit 2

£ 26.00
In Stock
Request Info
FrancisFrancis TRIO X1, X3, X6 - Head Kit 2
  • FrancisFrancis TRIO X1, X3, X6 - Head Kit 2
  • FrancisFrancis TRIO X1, X3, X6 - Head Kit 2
  • FrancisFrancis TRIO X1, X3, X6 - Head Kit 2
  • FrancisFrancis TRIO X1, X3, X6 - Head Kit 2

FRANCISFRANCIS TRIO X1, x3, X6, trio head kit 2

 

 

Replacement head kit for your TRIO pod machine.
A TRIO machine doesn't have a traditional group head silicon o-ring to seal the head to the portafilter handle. If you're having problems with drips from the brew head, this kit is required.

Please note that the TRIO brew head is different from the standard brew head, the TRIO brew head has a hole for the TRIO PIN rather than threaded to accept a screw. 

Note - A TRIO pod portafilter handle contains a black plastic insert that houses the pod. The TRIO chrome group head has three images of different coffee styles to illustrate the TRIO selections.

To get access to the brew head, you need to remove the TRIO pin, shower plate and large spring. To make the job easier will require the chrome group head housing to be removed, this can be done with a 7mm socket and 7mm spanner.
Ideally the boiler needs to be removed from the machine, as removing the brew head is difficult without proper access to the area.

Suitable for TRIO POD ONLY machines. They don't fit on a GROUND or CAPSULE machine or a 1st/2nd generation Classic.



 francisfrancis x6 + X1 TRIO + X3 TRIO - (ALL TRIO MACHINES)



What you get: 

  • TRIO brew head
  • Sspring
  • Gasket