FRANCISFRANCIS X6 x7 x5 HEATING ELEMENT FOR BRASS BOILERS
Brass boiler element.
If the fuses in your house are tripping when you turn on your X6, it is very likely that the element has shorted out.
Suitable for X6, X7 and X5 machines.
Also for X1 2nd generation brass boiler Classic and 3rd generation Ground, TRIO and capsule X1s (current model range).
You will have to dismantle your X1 to replace the element. Front face, steam knob, top, electrical spade connectors, four boiler nuts and bolts and the two fixings anchoring the element to the boiler. No warranty is available on spare parts that are self fitted. Only competent persons should attempt repairs. We accept no liability arising from incorrectly fitted spare parts. Unwanted or incorrectly specified parts cannot be returned. If in doubt please email HERE to ask about our repair services.
Elements are rated 230 Volts, we are unable to supply 110 Volt elements.
  
What you get:
- Heating element, 230v 1000w.
- Two rounded rubber washers (o-ring type).
- Two 13mm fixing nuts.
- Red silicone ring gasket that rests between the two halves of the boiler.
|